Conettix D6600 Installation Guide download pdf (Page 14)

D6600 | System Guide | 4.0 Special Conettix D6600 Applications

14 Bosch Security Systems, Inc. | 4/10 | 4998122712-04

4.0 Special Conettix D6600 Applications

The following special application has been requested by Bosch dealers. It is included here to assist you if you

have the same requirement. If you have any questions, contact Technical Support at (800) 289-0096.

Emulating a Direct Serial Connection Over a LAN Using D6680/D6682 Ethernet Network Adapters

Some applications might require a direct serial connection be emulated over the network. One application that

would require this is where the D6600 is located on another part of the network from the Automation System.

To create a direct serial connection between the D6600 and the automation system, connect the COM3

automation output from the D6600 to the two D6680s/D6682s on the system. This is true serial cable emulation

over the network (refer to

Figure 6 on page 14).

Figure 6: Direct Serial LAN Connection Configuration

COM3

RS232

1 2 3

D6680

192.158.001.017 192.168.001.016

1 - D6600 Receiver

2 - Ethernet

3 - Automation System

The commands necessary for this configuration to automatically establish a connection are as follows. Note the

reference to the D6680s/D6682s by their number (Number 1 or Number 2). You must also ensure that the port

parameters such as speed, number of bits, flow control, and so on are correct on the D6680/D6682 for the

serial device that they are connected to.

D6680/D6682 No. 1:

*** basic parameters

Hardware: Ethernet TPI

IP address: 192.168.001.017, no gateway set

******* Channel 1 *******

Baudrate 9600, I/F Mode 4C, Flow 00

Port 7700

Remote IP Adr: 192.168.001.016, Port 7700

Connect Mode: C0

D6680/D6682 No. 2:

*** basic parameters

Hardware: Ethernet TPI

IP address: 192.168.001.016, no gateway set

******* Channel 1 *******

Baudrate 09600, I/F Mode 4C, Flow 00

Port 7700

Remote IP Adr: 192.168.001.017, Port 7700

Connect Mode: C0

For more information, refer to the D6680 Ethernet Network Adapter Installation Guide (P/N: 4998138732), or

the Conettix D6682 Network Ethernet Adapter Installation Guide (P/N: F01U078049).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Conettix D6600 Installation Guide Page 14

Comments to this Manuals

Related products and manuals for Gateways/controllers Conettix D6600