Conettix D6600 Installation Guide download pdf (Page 13)

D6600 | System Guide | 3.0 Operation

Bosch Security Systems, Inc. | 4/10 | 4998122712-04 13

•

You can have two D6680s/D6682 on one D6600, one

with encryption On and the other with encryption Off.

This setup would allow for field devices to continue to

communicate with the D6680/D6682 with encryption

Off and begin the programming of the field devices to

send with encryption On to the second D6680/D6682.

This would allow devices to be programmed for

encryption without the loss of any signals or data to

the D6600. For more information on how to use two

D6680s/D6682s in a system as described, refer to

Section

If the device is a D9133TTL-E/DX4020,

change the destination IP address that is

currently programmed for the control panel to

the encryption-enabled D6680/D6682.

9. The devices that are programmed with encryption

communicate through the encryption-enabled

D6680 (v5.16 or later)/D6682, while the non-

encrypted devices, or those using encryption v5.1

or earlier, communicate through the original

D6680/D6682.

3.4.3 Using Two D6680s or D6682s in a

System

3.4.4 Obtaining the Latest D6200CD Software

on page 13.

If you do not already have the latest D6600CD (v1.10

or later) or D6200CD (v1.24 or later), you can obtain a

correct CD by of the following methods:

3.4.3 Using Two D6680s or D6682s in a System

If you will use two D6680s/D6682s in a system, both

using encryption (v5.16 or later) or one using

encryption and the other unencrypted, then do the

following steps:

Call and order a D6200CD from the Bosch

Customer Service group by calling 1-800-289-

0096.

1. The following equipment is needed:

Download the released software, firmware, and

documentation from the Bosch web site.

One additional D6680/D6682

One additional static IP Address

Downloading

1. Connect to the company web site:

A D6672 COM1 Expansion Kit for the D6600

www.boschsecurity.us

2. D6680/D6682 Number 1 is the network adapter

that is currently running.

, then search for D6600.

You can download software, firmware, and

documentation from the Conettix D6600 product

page.

3. Assuming the first D6680/D6682 is already set up

and running, connect the second D6600 on

COM1 to the D6600/D6100i as described in the

D6600/D6100i Network Operation and Installation

Guide (P/N: 4998122704).

4. Enable encryption in the second D6680/D6682 as

described in the Conettix D6680 Network Adapter

Installation Guide (P/N: 4998138732), or the

Conettix D6682 Network Ethernet Adapter

(P/N: F01U078049).

5. Add a receiver to the list of receivers under

Administration Æ Connection Settings with the

IP address and encryption key of the second

D6680/D6682.

6. Select the receiver name added in the previous

step.

7. Verify that the D6200 can communicate with the

D6600.

8. Program field devices to communicate with the

encryption enabled D6680/D6682:

Verify that the TTL-E NIM has the correct

firmware (v5.16 or later).

Enable encryption on the NIM device with the

same key that is entered in the D6680/D6682.

If the device is a C900TTL-E/C900V2,

change the destination IP address to match

the IP address in the encryption-enabled

D6680/D6682.

Download times can vary depending on

the speed of your Internet connection.

2. Read the D6600/D6100i Release Notes

(P/N: 4998122709) for the latest information

regarding software installation, changes, and

added features.

A decompression program that handles

.zip files is required in order to open the

zipped file.

3. Follow the installation procedures for software

and firmware in the Software Upgrade Procedure

section of the D6600/D6100i Operation and

Installation Guide (P/N: 4998122704).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Conettix D6600 Installation Guide Page 13

Comments to this Manuals

Related products and manuals for Gateways/controllers Conettix D6600